Common print jobs
Start the print job
Introduction
Océ VarioPrint 2050-70 print command dialog boxes
When you give the print command in an application, you can make the settings
for the print job in the following dialog boxes.
The 'Print' dialog box that is displayed by the application you run.
■
The 'Properties' dialog box, that is displayed when you click 'Properties' in
■
the 'Print' dialog box. Make sure that you first select the Océ VarioPrint
2050-70.
The 'Show settings before printing' dialog box, that is displayed when you
■
click 'OK' in the Print dialog box.
This manual describes the print tasks in the 'Properties' dialog box. This dialog
box is displayed when you click 'Properties' in the 'Print' dialog box.
Start the job in the Océ VarioPrint 2050-70 printer driver
You can do the following main tasks, in the Océ VarioPrint 2050-70 printer
drivers.
Create a profile (see 'Create a profile' on page 79).
■
Start a print job that uses a profile (see 'Start a print job that uses a profile'
■
on page 82).
Start an automatic print job (see 'Start an automatic print job' on page 84).
■
Start a mailbox job (see 'Start a mailbox job' on page 85).
■
Start a secured print job (see 'Start a secured print job' on page 86).
■
Start a print job on special material (see 'Start a print job on special
■
material' on page 87).
Read the On-line help of the Océ VarioPrint 2050-70 printer driver to
Note:
use the other tasks that you can do with the Océ VarioPrint 2050-70 printer
drivers.
78
Océ VarioPrint 2050-70 Job manual