Print On Special Material - Oce VarioPrint 2050-70 Job Manual

Print on special material

Introduction
You can use the following material for the print jobs (see 'Input trays, output
bins and materials' on page 142).
Paper from the trays.
■
Special material that you place in a tray for the current mailbox job.
■
Special material that you insert in the special feeder for the current mailbox
■
job.
Make sure that you place the material correctly in the paper trays and special
feeder (see 'Add the paper' on page 130).
The Key operator can lock the paper-compartment door or disable the special
feeder. If the special feeder is disabled, you cannot select the special feeder in
the display screen.
Before you begin
In the Océ VarioPrint 2050-70 print command window, you can initiate the
■
print job on special material (see 'Start a print job on special material' on
page 87).
Make sure that the materials are with the correct specifications (see 'Input
■
trays, output bins and materials' on page 142).
How to print a job on special material placed in a paper tray
Open the paper-compartment door, place the required paper and close the door.
1
Select the job in the mailbox.
2
Activate the 'Paper' section.
3
Make sure that the 'Paper input' card is open.
Check that the required size is selected in the 'Size' function box.
[63] The Tray and the required paper size are selected
[63] The Tray and the required paper size are selected
The print function 93