Improve the image quality of a copy
Introduction
The Océ VarioPrint 2050-70 has a tested technology to detect photos, rasters
and fine lines on the originals. Do not adjust the default quality settings, unless
you require a deviating image quality.
Check and, if necessary, adjust the settings for the following originals.
Originals contain extensive photos.
■
Originals are mainly text.
■
Before you begin
To check your image quality setting, make a test copy before you start a
■
copy job with many sets.
How to copy a photo with the glass platen
Place and align the photo face down on the platen.
1
Follow the feed direction according to the dimensions of the photo.
Select the 'Copy' mode
2
The 'Basic' section opens automatically.
Select '1-sided' in the 'Original' and 'Copy' function boxes.
3
Select 'No' in the 'Staple' function box.
4
Activate the 'Paper' section.
5
Make sure that the 'Paper input' is open.
Select the size and orientation of the required paper in the 'Source' function
6
box.
Make sure that the orientation of the paper matches the feed direction of the
photo.
When the size of the required paper does not match the dimensions of
Note:
your photo, you must adjust the enlargement or reduction (see 'Make an
enlarged or reduced copy' on page 50).
58
Océ VarioPrint 2050-70 Job manual
.