Oce VarioPrint 2050-70 Job Manual page 52

How to make an enlarged or reduced copy with the platen
Place and align the original face down on the platen.
1
Follow the feed direction according to the dimensions of the original.
Select the 'Copy' mode
2
The 'Basic' section opens automatically.
Select '1-sided' in the 'Original' and 'Copy' function boxes.
3
Select 'No' in the 'Staple' function box.
4
Activate the 'Paper' section.
5
Make sure that the 'Paper input' card is open.
Select the size and orientation of the required paper in the 'Source' function
6
box.
The selected size is displayed in the 'Paper' section.
[29] Select the paper size. The enlargement and reduction is not adjusted automatically
[29] Select the paper size. The enlargement and reduction is not adjusted automatically
Activate the 'Basic' section.
7
Adjust the 'Enlargement or reduction'.
The 'Enlargement or reduction rate' is shown in the 'Basic' section.
Use the Arrow keys or to select one of the pre-set values.
[30] Select the enlargement and reduction
[30] Select the enlargement and reduction
Select the number of copies.
8
Press the Start key .
9
52 Océ VarioPrint 2050-70 Job manual
.