Oce VarioPrint 2050-70 Job Manual page 63

Wait until the Interrupt symbol
2
[38] The Interrupt mode is entered
[38] The Interrupt mode is entered
Enter the settings for a new job.
3
Press the Start key to start the new job.
4
[39] Start a job in the Interrupt mode
[39] Start a job in the Interrupt mode
Repeat steps 3 and 4 for each subsequent job, if present.
5
Press the Interrupt key
6
The suspended copy job will continue.
[40] The suspended job continues
[40] The suspended job continues
The Océ VarioPrint 2050-70 quits the Interrupt mode automatically, 2
Note:
minutes after the last job.
The copy function
is displayed in the message box.
to quit the Interrupt mode.
63