Table of Contents
Advertisement
Insert the originals
You can place the originals in a long-edge feed direction or in a short-edge feed
direction. The alignment of the original on the platen refers to the feed
direction in the automatic document feeder.
To insert the originals, proceed as follows.
Hold the originals, face-up in reading direction.
■
Turn the original over, in anti-clockwise direction.
■
Keep the originals face-down, to insert.
■
[73] Short-edge feed direction (left) and long-edge feed direction (right) of the originals in the automatic document feeder
[73] Short-edge feed direction (left) and long-edge feed direction (right) of the originals in the
automatic document feeder
[74] Short-edge feed direction of the original on the platen
[74] Short-edge feed direction of the original on the platen
The scan function
109
Advertisement
Table of Contents
