About stapling
Introduction
The Océ VarioPrint 2050-70 has two staplers.
The internal stapler.
■
The off-line stapler.
■
The internal stapler works on the following conditions.
The function 'Staple' is on 'Yes'; and
■
The sets are printed on A4 paper; and
■
The sets do not contain more than 50 sheets; and
■
The sets are collected in the finisher.
■
When the multi-size bin is used, the Océ VarioPrint 2050-70 cannot staple
the sets.
You can use the off-line stapler, to staple any set with a maximum of 50 sheets.
The Océ VarioPrint 2050-70can staple off-line, during job processing.
When you prepare a copy or scan job, you must remove the staples from the
originals. You can use the staple remover, to remove and store the staples
safely.
Staple the sets with the off-line stapler
[5] Staple off-line
[5] Staple off-line
Introduction
21