Discrete Preset Activation Codes - Interactive Technologies SceneStation User Manual

Discrete Preset Activation Codes

An optional set of codes may also be enabled that allows a single IR code to directly activate any of
the station's 64 presets.
This feature may be enabled by a dip switch setting on the back of the station or by using the
SceneStation Studio software.
Discrete Preset codes use system code $18.
Then, each preset uses a six-bit data byte that is one less than the desired preset to activate. For
example, to activate preset 1, send data byte $00. To activate preset 2, send data byte $01. To
activate preset 64, send data byte $3F.
SceneStation Installation and Programming Guide Appendix B: IR Code Specifications | 81