Introduction - Interactive Technologies SceneStation User Manual

Introduction

SceneStation is an advanced lighting control playback device for use with all types of DMX based
digital lighting fixtures that can fit into a wide variety of commercial, residential and entertainment
projects.
SceneStation offers a wide array of features including:
Stand-Alone Playback - Outputs DMX data for direct connection to digital dimmers and
•
lighting fixtures.
Preset Scenes - Handles up to 64 presets, each with independent split fade times, follow
•
timers, looping and repeat counts.
Effects - Each preset may have a dynamic effect applied that can animate the scene. Several
•
parameters can be adjusted for each effect, allowing each scene to be tailored for a wide
variety of situations. Add sparkles, twinkles, color cycles, scene rotations and more.
Customizable Buttons - Each button can activate a preset, toggle a scene, start an ani-
•
mated chase, choose from a list of scenes, momentarily flash a preset, activate a pile-on
scene and more. Also, each button is backlit by a programmable RGB LED with hundreds
of color and blinking options.
Wireless Control - Stations contain an 2.4 GHz wireless module for triggering buttons
•
between multiple stations, and for communication with a host Mac or PC for show pro-
gramming and software updates (via a USB dongle).
IR Remote Control - An infrared receiver in each station allows the station to be operated by
•
universal remote control or via home/commercial automation systems, or with the optional
User's Remote or Programmer's Remote for show playback or programming.
DMX Capture and Backup - The station can also input DMX for taking DMX snapshots or
•
for allowing the station to operate as an automatic backup for another DMX controller with
programmable actions that can be activated when an external DMX controller stops out-
putting a DMX signal.
Attractive Design - SceneStation is available in White, Black, Ivory and Light Almond with
•
stylish Decora® compatible plastics, a designer flushplate with no visible hardware and
custom engraved button caps.
Easy Installation - Each station fits into a standard single-gang electrical box and only
•
requires power (12 to 24 VDC, or 16 to 24 VAC) and a DMX data cable. Stations that are
operating as a wireless slave to another station only requires power.
SceneStation Installation and Programming Guide Introduction | 1