Interactive Technologies SceneStation User Manual page 48

The second of two things the station can do is to lock out the front-panel buttons on the station.
The following controls enable the button lock and to choose the color and brightness of the
buttons that should be displayed on the station while the buttons are locked:
When DMX Output is Restored
The action to be taken when an external console stops outputting DMX and the station regains
control of the DMX line is chosen in this group:
Available DMX Output Restore options include:
Hold Last Look - The station will remember the very last scene that the external controller
•
was outputting and the station will continue to output this captured scene. This scene
can be different from any scene that is stored in the station's internal memory. As soon
as the user presses a button on the station, the station will crossfade from the held
scene to the user's chosen scene.
Snap to Current Preset - The station will immediately begin outputting the scene that is
•
currently selected on the station. No crossfade will be performed.
Fade to Current Preset - The station will temporarily capture the last scene from the
•
external controller and then immediately begin crossfading to the currently selected
scene on the station, creating a smooth transition from the external controller's scene
to the current preset.
Fade to Black - The station will temporarily capture the last scene from the external con-
•
troller and then immediately begin fading all channels to zero (black), creating a smooth
transition from the external controller's scene to blackout. The station uses the default
fade time to perform the fade out.
Activate Preset (x) - The station will temporarily capture the last scene from the external
•
controller and then immediately activate the chosen preset. The station will crossfade
(if the preset has a fade time) to the newly activated scene, creating a smooth transition
from the external controller's scene to the specified preset.
42 | Using SceneStation Studio SceneStation Installation and Programming Guide