Right Switch Bank - Interactive Technologies SceneStation User Manual

Right Switch Bank

1: Reserved - This switch is currently unused. Leave in the "Off" position.
•
2: User's Remote Lock - When turned "On", this switch disables the User's Remote. This
•
setting can also be turned on or off by an option available in SceneStation Studio.
3: Front-Panel Memory Lock - When turned "On", this switch disables the ability for the
•
front-panel to take DMX snapshots or adjust fade times. This setting can also be turned
on or off by an option available in SceneStation Studio
4: IR Memory Lock - When turned "On", this switch disables the ability for the IR
•
Programmer's Remote to edit the memory of the SceneStation. This setting can also be
turned on or off by an option available in SceneStation Studio.
5: IR Direct Preset Codes - When turned "On", this switch enables the "Direct Preset
•
Codes" feature. This feature enables additional IR codes that directly activate any of the
64 presets in the station. This setting can also be turned on or off by an option available in
SceneStation Studio.
6, 7, 8: Pair With IR Remote - These three switches choose which remote IR code the
•
station will receive commands from. Use this setting to set specific remote controls to
operate only specific stations. This setting can also be chosen by an option available in
SceneStation Studio. The following table shows which combination of switches corre-
spond to which options:
See Appendix A for instructions for changing the IR code used by the Programmer's
Note:
Remote.
SceneStation Installation and Programming Guide
6 7 8
OFF OFF OFF
OFF OFF ON
OFF ON OFF
OFF ON ON
ON OFF OFF
ON OFF ON
ON ON OFF
ON ON ON
Pair With Remote
Remote Code 1
Remote Code 2
Remote Code 3
Remote Code 4
Remote Code 5
Remote Code 6
All Remotes
No Remotes
Hardware Configuration | 13