Dmx Options; When Dmx Input Is Detected - Interactive Technologies SceneStation User Manual

DMX Options

The DMX Options tab of the station editor window is used to change the preferences for what the
station should do when it receives DMX from another source, or when it begins outputting DMX again
after the external DMX source has been removed:

When DMX Input is Detected

The chosen actions in this group are taken whenever the station detects that another source
of DMX has become active on the DMX link. The station always stops outputting its own DMX
signal, but it can be programmed to take additional actions.
The first DMX Input action the station can take is to deactivate the current preset. The station
will be allowing the external console to pass-thru, but when the external DMX signal is lost and
the station resumes outputting DMX, no preset will be active. To activate this action, check this
check box:
SceneStation Installation and Programming Guide Using SceneStation Studio | 41