Preset Edit Mode - Interactive Technologies SceneStation User Manual

Preset Edit Mode

The Preset Edit Mode is used to edit the properties of a preset. The properties of a preset include its
Scene, Fade Time, Follow Time, Loop, Repeat and Indicator properties.
To enter the Preset Edit mode, press:
EDIT + (two-digit scene number)
The center LED on the station will begin to blink one of five different colors. The color of the center
LED indicates which of the properties is being edited:
Fade Time
Follow Time =
Loop To
Scene
Repeat
Indicator
To select which property of a preset is being modified, press one of the six property buttons at the
bottom of the remote:
FADE, FOLLOW, LOOP, SCENE, INDICATOR or REPEAT
By default, the Scene property is selected (Cyan) when the Edit Mode is first entered.
After editing a property, a different property button can be pressed to change more than one property
at a time.
After changes are made, press the ENTER button to save the changes.
To cancel changes, press the CANCEL button.
The following sections describe in detail how to edit each of the properties.
52 | Using the Programmer's Remote
= Red
Yellow
=
Green
=
Cyan
=
Magenta
= (see below)
SceneStation Installation and Programming Guide