Programming Examples - Interactive Technologies SceneStation User Manual

Programming Examples

This chapter provides step-by-step instructions of how to program a wide variety of typical scenarios
into a SceneStation.
You can use these examples when programming a SceneStation with either the SceneStation Studio
software or with the Programmer's IR Remote.
Example 1: Create a Preset
•
Example 2: Assign a Preset to a Button
•
Example 3: Set Timing Parameters for a Preset
•
Example 4: Program a Button to Toggle a Preset
•
Example 5: Create a Loop
•
Example 6: Change the Indicator Color for a Preset
•
Example 7: Program a Button to Activate Multiple Presets
•
SceneStation Installation and Programming Guide Programming Examples | 67