Managing Stations - Interactive Technologies SceneStation User Manual

Managing Stations

When SceneStation Studio is opened on your computer, a list view window appears that is used to
display all stations that are found wirelessly and stations that have been newly created or loaded from
a file.
This picture shows the main list view window of SceneStation Studio with three wireless stations:
Wireless Stations
Any stations that are discovered wirelessly by the USB RF Adaptor will appear in the list and include
the following information:
Station - The user-defined name of the station.
•
Show - The name of the show currently running in the station.
•
Serial - The serial number of the station.
•
Version - The version number of the firmware running in the station.
•
Signal - The signal strength of the wireless signal to the station. A colored indicator (Green,
•
Yellow, Red) gives a rough estimate of the overall signal strength.
Channel - The Wireless Channel currently being used by the station's wireless module.
•
16 | Using SceneStation Studio SceneStation Installation and Programming Guide