Displays; Figure 12: Displays - GE Lullaby Warmer Maintenance And Service Manual

1.5

Displays

The Lullaby TM Warmer has three displays and a bar graph.
Illustration
Baby
Tempera
ture
Control
Temperature
APGAR
Timer
Global
Alarm
Check
baby
Indicator

Figure 12: Displays

8 2042376-001 Rev G ©2012 General Electric Company. All rights reserved. Lullaby
Description
The displays on the control panel
are explained as below:

Baby
indicates
measured
temperature probe.
Note: The skin probe must be
properly connected to the
% Power
warmer and the baby for an
Bar
accurate baby temperature
graph
measurement.
Indicator

Control temperature display
indicates
temperature the user selects in
the Baby Mode.

The baby temperature range is
from 30.0 – 38.0°C.

The
display is not active in the
Manual Mode.

% Power bar graph indicates
power
increments of 5%.

APGAR timer display indicates
clocked time in minutes and
seconds up to a maximum of
60 minutes. The APGAR timer
will beep at 1, 5 and 10
minutes, and then every 5
minutes until clocked time of 60
minutes in total is reset to zero.
temperature display
the temperature
by the
the control
control temperature
level selected
Warmer
TM
skin
in