5.8.11 Mounting The Retaining Clip; 5.8.12 Assembling The Slotted Bedside Panel; Checkout Procedures; Figure 79: Mounting The Resuscitation Bag Clip - GE Lullaby Warmer Maintenance And Service Manual

5.8.11 Mounting the Retaining Clip

Illustration
Figure 79: Mounting the
Resuscitation Bag Clip

5.8.12 Assembling the slotted Bedside Panel

Illustration
Figure 80: Assembling the Slotted
Bedside Panel
5.9

Checkout Procedures

TM
After the Lullaby Warmer is fully installed carry out the mandatory checkout procedures. Refer
to 0 System Setup and Checkout Procedures.
56 2042376-001 Rev G
Retaining
Clip
Slotted Bed
Side Panel
©2012 General Electric Company. All rights reserved. Lullaby
Description
Mounting the Retaining Clip:
1. Insert the clip and turn to lock in the
dovetail.
Description
Assembling the Slotted Bedside Panel:
1. Press the endpins in and lift the
bedside panel out of the notches. Refer
Operation and Maintenance manual
for instructions.
2. Hold the Slotted bedside panel and
guide the endpins into the notches
located in the bed.
3. Release the endpins.
4. Ensure that the Slotted bedside panel
is held in place firmly.
Warmer
TM