Starting Epson Rc+ Setup Program; Installing Epson Rc; Reserving Address Resources Of Epson Rc+ Options - Epson RC420 Manual

(1) Start Windows in your PC and set the EPSON RC+ setup CD-ROM in the drive.
(2) Start Explorer in the RC420 Controller and open the following folder.
NOTE
(3) Double-click the "Setup.exe" in the EPSON RC folder.
(1) Click the <Next> button in the [Welcome to the EPSON RC+ Installation] dialog.
(2) Confirm that the Name is "EPSON RC User" and the Organization is "SEIKO
(3) Confirm that the destination location drive is "C" in the [Choose Destination
(4) Check the check box for the option you want to use in the [Select Options] dialog.
(5) When you checked the [Install Vision Guide] check box in the [Select Options]
(6) Click the <Next> button in the [Start Copying Files] dialog.
(7) The [Information] dialog appears. Click the <OK> button.
(8) Click the <Next> button in the [Acrobat Reader Setup] dialog.
(9) Click the <Next> button in the [Choose Destination Location] dialog.
(10) The [Information] dialog appears. Click the <OK> button.
(11) Select the <Yes, I want to restart my computer now.> option button in the
(12) After Windows restarts, double-click the <EPSON RC+> icon and confirm that
To use the EPSON RC+ options "Expansion I/O Board" and "Pulse Generating Board",
reserve address resources of each option.
(1) Double-click the <My computer> - <Control Panel> - <System> icons.
(2) Select the [Hardware] tab in the [System Properties] dialog and click the <Hardware
RC420 Rev.9

12.3.4 Starting EPSON RC+ Setup Program

\My Network\Entire Network\Microsoft Windows Network\Workgroup name of
your PC\Name of your PC \Drive name\EPSON RC
If you cannot see the name of your PC in Explorer window, check the NetBEUI
configuration and network cable connection.

12.3.5 Installing EPSON RC+

EPSON CORP" in the [Customer Information] dialog. Then, click the <Next>
button.
Location] dialog. Then, click the <Next> button.
Then, click the <Next> button.
dialog, the [Select Vision System Type] dialog appears. Select the type you want to
use and click the <Next> button.
[InstallShield Wizard Complete] dialog. Then, click the <Finish> button.
EPSON RC+ starts.

12.3.6 Reserving Address Resources of EPSON RC+ Options

Wizard> button.
Maintenance 12. Recovering the HDD
157