Epson RC420 Manual page 155

(5) After "SKIP BAD SECTOR CHECK [Y, N]" appears, press the <Y> or the <N> key.
NOTE
NOTE
(6) Terms of use appears. Follow the procedure and press the <Enter> key three times.
(7) Easy Restore starts.
(8) Click the <Continue> button.
NOTE
RC420 Rev.9
The time required will change by the key selection since the process changes. The
required is only a measure.
Key
Y Skip the bad sector check
N Do not skip the bad sector check
For the recovery of the HDD that has been used in the RC420, selecting "N" is
recommended.
If you click the <Cancel> button, the Easy Restore ends. When you accidentally
turned ON the RC420 with the recovery disk in the FD drive, click the <Cancel>
button in this window.
Maintenance 12. Recovering the HDD
Contents Time Required
About 3 minutes
About 20 minutes
145