Regular Maintenance Inspection; Schedule For Maintenance Inspection; Inspection Point - Epson RC420 Manual

2. Regular Maintenance Inspection

Performing the inspection steps properly is essential to preventing trouble and maintaining
safety. This chapter describes schedule for maintenance inspection and the procedures.
Be sure to perform the maintenance inspection in accordance with the schedule.

2.1 Schedule for Maintenance Inspection

Inspection points are divided into five stages: daily, monthly, quarterly, biannual, and
annual. The inspection points are added every stage.
If the robot system is operated for 250 hours or longer per month, the inspection points
must be added every 250 hours, 750 hours, 1500 hours, and 3000 hours operation.
4 months (1000 h)
5 months (1250 h)
6 months (1500 h)
7 months (1750 h)
8 months (2000 h)
9 months (2250 h)
10 months (2500 h)
11 months (2750 h)
12 months (3000 h)
13 months (3250 h)
RC420 Rev.9
inspection
1 month (250 h)
2 months (500 h)
3 months (750 h)
Maintenance 2. Regular Maintenance Inspection

Inspection Point

Daily Monthly
inspection
Quarterly Biannual
inspection inspection
Annual
inspection
109