Epson RC420 Manual page 125

Backing up / Restoring a Project
You can back up the whole of stored project and restore it. You can also move your
developing EPSON RC+ applications into another system.
Back up a project
Follow the steps below to make a backup copy of the current project.
(1) Select the [Copy] command in the [Project] menu to open the [Copy Project] dialog.
(2) Select the drive where a backup copy will be made in the [Destination Drive] box.
(3) Enter the current project name for the [Destination Project Name] box.
(4) Click the <OK> button.
NOTE
The currently open project is the original project stored in the C drive, not a backed-up
project stored in the destination drive specified in step (2).
NOTE
If there is more than one project, back up every project separately.
RC420 Rev.9
Maintenance 2. Regular Maintenance Inspection
115