Epson RC420 Manual page 99

(26) Select the "Other devices", then click the <Next> button.
(27) Click the <Have disk...> button.
(28) Enter or browse for the target path for the "VSRCShut.inf" file located in
(29) Reboot the system when prompted.
EPSON RC+4.2 or after (Windows XP)
(1) Restart the Controller and enter the BIOS.
(2) In the PCI configuration, set IRQ11 to "Legacy". This will reserve IRQ11 for
(3) Reboot the Controller and start Windows.
(4) Open the [Control Panel] and select [Switch to Classic View].
(5) Double-click the <Add Hardware> icon.
(6) The [Add Hardware Wizard] dialog will appear. Click the <Next> button.
(7) Select the <Yes, I have already connected the hardware> button, then click the
RC420 Rev.9
Setup & Operation 10. UPS (Uninterruptible Power Supply)
"c:\EpsonRc\RC420\Drivers". Then click the <Next> button.
COM4.
<Next> button.
89