Network Configuration - Epson RC420 Manual

(6) Check the [Share this folder on the network] check box in the [Network sharing and
Configure the network to use "NetBEUI" protocol in RC420 and your PC.
For RC420, refer to the procedure from step (2) in 5. Windows XP. Procedure in step (1)
is already configured at shipment.
For your PC, refer to the applicable section according to Windows version installed in
your PC.
1.
(1) Double-click the <My computer> - <Control Panel> - <Network> icons.
(2) Select the [Configuration] tab in the [Network] dialog.
(3) Confirm that the "NetBEUI" exists.
(4) Select the [Protocol] in the [Select Network Component Type] dialog and click the
(5) Select the "Microsoft" for the [Manufactures] and the "NetBEUI" for the [Network
(6) Confirm that the "NetBEUI" is added in the [Configuration] panel in the [Network]
2.
(1) Double-click the <My computer> - <Control Panel> - <Network> icons.
(2) Select the [Configuration] tab in the [Network] dialog.
(3) Confirm that the "NetBEUI" exists.
(4) Select the [Protocol] in the [Select Network Component Type] dialog and click the
RC420 Rev.9
security] group box and click the <OK> button.

12.3.3 Network Configuration

Windows 95
If the "NetBEUI" exists, click the <OK> button and finish the network configuration.
If the "NetBEUI" doesn't exist, click the <Add> button.
<Add> button.
Protocols]. Then, click the <OK> button.
dialog. Then, click the <OK> button.
Windows 98
If the "NetBEUI" exists, click the <OK> button and finish the network configuration.
If the "NetBEUI" doesn't exist, click the <Add> button.
<Add> button.
Maintenance 12. Recovering the HDD
153