Epson RC420 Manual page 110

Setup & Operation 10. UPS (Uninterruptible Power Supply)
(6) Click the <Configure...> button. The [UPS System Shutdown Program] dialog
(7) Enter the file name for the [Run] box.
100
will appear. When changing either the Controller's computer name or the user
name, input the new computer name or the user name in the [Run as] box.
EPSON RC+4.1 or before (Windows 2000)
SN***** : This is the default computer name. The actual computer
Administrator : This is the default user name. Specify the user name for
EPSON RC+4.2 or after (Windows XP)
SN***** : This is the default computer name. The actual computer
EPSON RC User : This is the default user name. Specify the user name for
EPSON RC+4.1 or before (Windows 2000) : C:\WINNT\system32\UPSshut.exe
EPSON RC+4.2 or after (Windows XP)
name varies depending on serial number at shipping or user
setting.
logging on the Controller.
name varies depending on serial number at shipping or user
setting.
logging on the Controller.
: C:\WINDOWS\system32\UPSshut.exe
RC420 Rev.9