Output Indicator <9; Patient Lead Connector <10 - Physiomed Jubilee Operating Instructions Manual

Controls and Indicators
2.1.9 Output Indicator <9>
2.1.10 Patient Lead Connector <10>
Patient Lead - Mode(s) of Attachment
The colours of the connectors facilitate easy and correct
attachment of the electrodes according to their polar-
ity.
Colour of the female plug:
red = anode (+), blue = cathode (-)
Type BF component, not connected to
protective ground wire.
Warning Take care that the electrodes are by no means touched after the cur-
rent is turned up!
6
The indicator tells you to be cautious when handling
the electrodes:
The patient lead connector <10> is under
Warning!
voltage! Take care that the electrodes are by no
means touched after the current is turned up!
The patient lead connector <10> serves to plug in the pa-
tient lead. You can plug plate electrodes, adhesive electrodes
or other types of electrodes into the patient lead.
Anode (+)
Cathode (-)
PHYSIOMED-Jubilee