Therapy Using Medium-Frequency Current Modes; Pain Therapy, Hyperaemisation, Detonisation Using Amf Current; Muscle Stimulation Using Medium-Frequency Surge Currents - Physiomed Jubilee Operating Instructions Manual

Stimulation Current Therapy
4.6

Therapy using medium-frequency current modes

4.6.1 Pain Therapy, Hyperaemisation, Detonisation using AMF Current

Treatment Procedure
(1) Attach the electrodes to the respective stimulation points.
(2) Select the current mode
(3) Depending on the indication, select a frequency band or a fixed frequency.
(4) If necessary, alter the basic frequency.
(5) Set the therapy time.
(6) If necessary, plug in the manual release key as therapy pause button.
(7) Slowly turn up the intensity with intensity control <6>). The therapy time
elapses.
Warning Take care that the electrodes are by no means touched after the cur-
rent is turned up!
(8) After treatment, an acoustic signal will be issued.
Turn the intensity down to 0.
(9) Remove the electrodes.

4.6.2 Muscle Stimulation using Medium-frequency Surge Currents

The medium-frequency surge currents intended for the surge current therapy is
. Both current modes are usually applied to faradic excitable nerve-muscle
KOTS
units.
32
from the display <3>.
AMF
PHYSIOMED-Jubilee