Table of Contents
Advertisement
8.3 Call Program
To call saved programs proceed as follows:
(1) Select the menu
(2) Select one of the programs
(3) Select the symbol call program
The selected program is set. The respective menu appears in the display <3>.
The program number appears in the lower status bar <4> (e.g. F1) and, in case of
a potpourri, additional indicator dots showing the position within the potpourri are
displayed. The number of dots corresponds to the position number in the potpourri;
on the display above, e.g. the momentary mode of treatment is carried out using
current no. 2 in program F1.
Using a single therapy mode, you are only shown the program number.
Note
When selecting a current sequence, you always have to reset the in-
tensity after every current mode before you can apply the next current
mode. This measure enhances the protection of the patient.
8.4 Delete program
Proceed as follows to delete a program:
(1) Select a current mode on the display <3>.
(2) Select the symbol programs
displayed.
(3) Select one of the programs
(4) Select the symbol delete programs. The bin symbol starts flashing.
(5) Select the program to be deleted and confirm.
(6) Exit the menu.
Now the program is deleted and can be newly assigned.
PHYSIOMED-Jubilee
from the display <3>.
INDIVID
to
using the data selector <5> and confirm.
F1
F25
. The menu individual programs will be
with the data selector <5> and confirm.
to
F1
F25
and confirm.
Individual Programs
41
Advertisement
Table of Contents
