Physiomed Jubilee Operating Instructions Manual page 36

Stimulation Current Therapy
Treatment using automatic current triggering
(1) Attach the electrodes to the respective stimulation points. Position the patient to
enable free movement of the stimulation area.
(2) Depending on the indication, select one of the current modes
from the display <3>.
(3) If necessary, select the function
(4) If desired, activate the acoustic signal.
(5) Adept the pulse time T or the frequency.
(6) Set the tension time T and the release time R.
The release time R should be selected to give the nerve-muscle-unit sufficient
time for recreation.
(7) Select the ramp of the current rise (for FaS and HVS) or the mode of pulse (for
T/R).
(8) Set the therapy time.
(9) If necessary, plug in the manual release key as therapy pause button.
(10) Slowly turn up the intensity with intensity control <6>. The therapy time
elapses.
Warning Take care that the electrodes are by no means touched after the cur-
rent is turned up!
(11) Signs of fatigue should make you stop the treatment (they may already occur
after a few muscle contractions)!
(12) After treatment, an acoustic signal will be issued. Turn the intensity down to 0.
(13) Remove the electrodes.
Treatment with manual release key
Treatment with a manual release key is advisable for individual therapy methods in
the field of sports, for intentional exercises according to Förster as well as for prac-
tising both co-ordination and nerve tracts. This is the great advantage of working
with the manual release key.
(1) Plug the manual release key into the manual release key socket <11> at the
rear face of the instrument.
(2) Apply the electrodes at the respective stimulation points. Position the patient to
enable free movement of the stimulation area.
(3) Depending on the indication, select one of the current modes
from the display <3>.
(4) If necessary, select the function
(5) Activate the acoustic signal if desired.
(6) If necessary, adapt the pulse time T or the frequency.
(7) When applying FaS or HVS, set the release time R to 1s and the tension time T
to the left to the manual release key position (turn the release time R to the
rightmost position when applying T/R).
(8) Set the therapy time.
30
biphase.
biphase.
, or
FaS HVS T/R
, or
FaS HVS T/R
PHYSIOMED-Jubilee