Physiomed Jubilee Operating Instructions Manual page 16

Controls and Indicators
Current Modes DF, MF, CP,
Current Modes UR,
Current Modes HV,
Current Mode
Current Mode
10
LP
galvanic basis
Switching in a
The current setting is displayed in the upper status bar.
IG 30, IG 50, FM,
Switching from monophase to biphase pulse emission. The cur-
rent setting is displayed in the upper status bar.
TENS
Switching from monophase to biphase pulse emission. The cur-
rent setting is displayed in the upper status bar.
Pulse time (possible values: 80 ... 400 µs)
Burst frequency (possible values: OFF; 1 – 10 Hz),
Frequency bands (for HV and TENS 70 – 150
Hz or 1 – 150 Hz) or fixed frequency (1 – 200
Hz). The currently selected frequency is dis-
played in the upper status bar.
FaS
Switching from monophase to biphase pulse emission. The cur-
rent setting is displayed in the upper status bar.
Acoustic signal, makes every current pulse audible
T : Pulse time, possible values: 0,1 – 10 ms
i
R : Release time , possible values: 10 – 250 ms
i
Pulse shape (triangle, rectangle)
Basic settings: T = 1ms, R = 20 ms, triangular pulse
Relation contraction (
possible values T = 1 – 60 s, R= 1 – 60;
manual release key (only if R > 1s)
Ramp (4 settings m
1
setting is displayed in the upper status bar.
HVS
Switching from monophase to biphase pulses. The current setting
is displayed in the upper status bar.
Acoustic signal, makes every current pulse audible.
(5%).
STOCH
Tension
, 1 s) / pause (
to m ) with different rise times. The current
4
Release
, 1 s),
PHYSIOMED-Jubilee