Physiomed Jubilee Operating Instructions Manual page 17

Table of Contents

Advertisement

Current Mode
Current Mode
Current Mode
PHYSIOMED-Jubilee
Frequency (possible values: 2 – 200 Hz)
Relation contraction (
possible values T = 1 – 60 s, R= 1 – 60;
manual release key (only if R > 1s)
Ramp (4 settings m
1
setting is displayed in the upper status bar.
T/R
Pulse time (possible values: 1s – 0.1 ms)
Release time (possible values: 7 s to 1 ms; manual release key)
Pulse shapes (square-wave pulse r
triangular pulses d
1
ting is displayed in the upper status bar.
AMF
Intensity display (mA), to be set with intensity control <6>
5 pre-set frequency bands,
fixed frequency (Select 0 – 250 Hz)
Basic frequency (possible values: 2.0 – 9.5 kHz)
KOTS
Intensity display (mA) to be set with intensity control <6>
Tension time (possible values: 1 to 60 s in steps of 1s;
manual release key (only if R > 1s)
Release time (possible values: 1 to 60 s) in steps of 1s
Ramp (4 settings m
1
setting is displayed in the upper status bar.
Modulation frequency (selectable: 0 – 95 Hz)
Pulse shape (sine, triangle, rectangle)
Pulse length T
(possible values: 2 ms, 4 ms, 6 ms, 8 ms, 10 ms, auto)
Tension
, 1 s) / pause (
to m
) with different rise times. The current
4
, trapezoidal pulses t
1
– d
, exponential pulse e
3
to m
) with different rise times. The current
4
Controls and Indicators
Release
, 1 s),
– t
,
1
3
). The current set-
1
11

Advertisement

Table of Contents
loading

Table of Contents