Preparing The Intellistart Fluidics System; Installing The Reservoir Bottles - Waters Xevo TQ-S micro Overview And Maintenance Manual

Preparing the IntelliStart Fluidics system

For additional information, see
Notice:
on it, do not store large-volume solvent reservoirs on top of the instrument.

Installing the reservoir bottles

Use standard reservoir bottles (15-mL) for instrument setup and calibration. Use the
Low-volume Adaptor Kit (sold separately) to infuse smaller volumes. The low-volume
vials have a volume of 1.5 mL.
Required material
Chemical-resistant, powder-free gloves
page 246
To avoid damaging the mass spectrometer by accidentally spilling solvent

Preparing the IntelliStart Fluidics system

and Appendix D.
January 11, 2016, 715004599 Rev. B 51