Configuring System Identification - Avaya 4000 Series Quick Start Configuration

4850GTS-PWR+(config)#save config
4850GTS-PWR+(config)#show banner
Current banner setting: CUSTOM
4850GTS-PWR+(config)#end
4850GTS-PWR+#exit
My Company Name
123A My Address Avenue
Phone: (123) 555-5555 * Fax (123) 555-5555
http://www.mycompanywebsite.com
Enter Ctrl-Y to begin.
***************************************************************
*** Ethernet Routing Switch 4850GTS-PWR+
*** Avaya
*** Copyright (c) 1996-2013,
***
*** HW:R0B
***************************************************************
Variable definition
Use the data in the following table to use the banner command.
Table 10: banner command
custom
static
<line_number>
< LINE >

Configuring system identification

About this task
Configure system identification to specify the system name, contact person, and location of
the switch. Also, to add trap receiver to the trap-receiver table.
Quick Start Configuration for Avaya ERS 4000 Series
My Town
All Rights Reserved
FW:5.6.0.15 SW:v5.7.0.003
Variable
CA 12345
Value
Disables the use of the default banner.
Activates the use of the default banner.
Banner line number you are setting. The
range is 1–19
Specify the characters in the line number.
Configuring system identification
***
***
***
***
***
November 2013 33