Side-By-Side Installation - Danfoss VLT Compressor Drive CDS 803 Design Manual

How to Install

5.1.3 Side-by-side Installation

The frequency converter can be mounted side-by-side but requires the clearance above and below for cooling.
Size
H3
H4
H5
Table 5.3 Clearance Required for Cooling
5 5
NOTICE
With IP21/NEMA Type1 option kit mounted, a distance of 50 mm (2 in) between the units is required.
5.1.4 Field Mounting
For field mounting, IP21/NEMA Type 1 kits are
recommended.
30
VLT
IP class 3x200–240 V
IP20 3.7 (5)
IP20 5.5–7.5 (7.5–10)
IP20 11 (15)
Danfoss A/S © 12/2015 All rights reserved.
®
Compressor Drive CDS 803
Power [kW(hp)]
3x380–480 V
5.5–7.5 (7.5–10)
11–15 (15–20)
18.5–22 (25–30)
Clearance above/below [mm(in)]
100 (4)
100 (4)
100 (4)
MG18N202