Adding A User; Setting/Changing The Ip Address - Kemper KHS Logic Control System Installation And Operating Instructions Manual

3.1.1 Adding a user

The KHS-Logic system control in the as delivered condition does not include any user names.
The main user and the master password are created by our service technician during commissioning.
If you need to add users, switch to the "Settings" menu item, enter the new user name, the related password
and
your master password and please confirm your input with "Save".

3.1.2 Setting/changing the IP address

If you want to change the IP address later on to, e.g., link your network, go to the "Settings" menu item
and fill in the "Network Settings" boxes accordingly. Apply the changes by confirming with "Save".
Important here is that you are logged in to be able to make any changes.
- 16 -