Wiring For Kemper Khs Components With Electrical Connection - Kemper KHS Logic Control System Installation And Operating Instructions Manual

4. Wiring for KEMPER KHS components with electrical connection

This list of cables only shows examples of applications. The exact design of the cables in questions must be
carried out on site by the planner on the basis of the ambient conditions (temperature, frequency, routing
type, mechanical load).
* Possible cable type for fixed routing, without mechanical load
** Shielded cable lead
According to VDE 0815: The specification of signal transmission cables with respect to the
diameter is specified in mm.
Gebr. Kemper GmbH & Co. KG
Harkortstraße 5
D-57462 Olpe
- 33 -
Service-Hotline +49 2761 891-800
info@kemper-olpe.de
www.kemper-olpe.de