Kemper KHS Logic Control System Installation And Operating Instructions Manual page 88

In the network environment window you can
see your network cards. Please use the mouse
to go to the network card connected with the
hygiene system and press the right mouse
button. In the popup window that appears
click "Properties"
Now mark "Internet Protocol (TCP/IP)"
and click on properties.
Note: If your computer is preset to "Use the
following IP address", continue with the steps
a) Add additional IP address
under a).
If your computer is preset to "Assign IP
address automatically", continue with the
steps under b) p.12
To be able to create an IP address, go to the
"Expanded", "Extended" or "Advanced"
button
- 12 -