Temperature Control Through Individual A-Valve / C-Valve - Kemper KHS Logic Control System Installation And Operating Instructions Manual

You can now set up to 5 intervals for each day. For the process to run correctly, the starting time,
the flushing time and the maximum flushing time must be adapted to your system.
By pressing the "Copy" button, you can use the settings of one weekday for another weekday by
using the "Paste" button, which then appears.
Apply your settings by pressing the "OK" button.

3.1.14 Temperature control through individual A-valve / C-valve

Proceed as described above to the "A-Valve" or C-Valve" menu item and after you have
selected the valve click "Edit Configuration".
You can now configure the temperature flushing. For the process to run correctly, the start and stop
temperature, the maximum flushing time and the routine flushing must be adapted to your system. The routine
flushing is used when no temperature flushing was performed during one week. Apply your settings by pressing
the "OK" button.
- 24 -