IFM Electronic AC402S Programming Manual page 61

SmartPLC SafeLine AC4S with fieldbus interfaces
Alternatively, this data can be read separately with the following FB:
>
Read parameter images
Name
Get_InputParameter
Get_OutputParameter
>
read slave lists
Name
Get_LPS
Get_LDS
Get_LAS
Get_LPF
Get_LCE
Get_LCEMS
Get_LCEAS
Get_LDAE
>
Read configuration data of the slaves
Name
Get_CDI
Get_PCD
>
Read status of the voltage supply
Name
Get_ASi_PHY_Dat
Description
Read parameters of the inputs of the slaves at the AS-i
master (PI)
Read parameters of the outputs of the slaves on the
AS-i master (PP)
Description
Read list of projected slaves (LPS)
Read list of detected slaves (LDS)
Read list of activated slaves (LAS)
Read list of peripheral faults (LPF)
Read list of configuration errors (LCE)
List of configuration errors - read missing slaves
(LCEMS)
Read of the configuration errors - read additional slave
(LCEAS)
Read list of double address errors (LDAE)
Description
Read configuration data image (IO, ID, ID1, ID2) of all
slaves on the AS-i master
Read permanent configuration data of all slaves (IO, ID,
ID1, ID2) on the AS-i master
Description
Determine voltage supply status of the AS-i network
Reference
→
Get_InputParameter (→ S. 141)
→
Get_OutputParameter (→ S. 143)
Reference
→
Get_LPS (→ S. 125)
→
Get_LDS (→ S. 123)
→
Get_LAS (→ S. 121)
→
Get_LPF (→ S. 135)
→
Get_LCE (→ S. 127)
→
Get_LCEMS (→ S. 131)
→
Get_LCEAS (→ S. 129)
→
Get_LDAE (→ S. 133)
Reference
→
Get_CDI (→ S. 137)
→
Get_PCD (→ S. 139)
Reference
→
Get_ASi_PHY_Dat (→ S. 119)
42514
42515
42516
42520
61