IFM Electronic AC402S Programming Manual page 253

SmartPLC SafeLine AC4S with fieldbus interfaces
Parameter data
Parameter Data type
IN_Channel_A INT
IN_Channel_B INT
EnableIN_Test BOOL
DisableLogging BOOL
EnableStartupTest BOOL
SynchTime WORD
StabilisingTime WORD
* ... Default value
>
Process data
Parameter Data type
S_IN_dep_filter_testreq SAFEBOOL Safe process signal
>
Description
Local input to which sensor
channel A is connected.
Local input to which sensor
channel B is connected.
Evaluation of a test signal which
was created by a local output
Transmission of the event
messages to OSC of the device
Control execution of the start-up
test
Synchronisation time
Max. bounce time
Description
Possible values
1 Local input IN1
... ...
8 local input IN8
1 Local input IN1
... ...
8 local input IN8
FALSE Test signal is ignored *
TRUE Test signal is evaluated
FALSE Following states of the state diagram
are transmitted to the OSC: *

S_ON

S_OFF

S_Test

S_Error

S_Init (HW-Error)
TRUE Following states of the state diagram
are transmitted to the OSC:

S_Test

S_Error

S_Init (HW-Error)
FALSE No start-up test *
TRUE Start-up test is executed; slave waiting
for start-up sequence OFF  ON
0 Infinite
250 250 milliseconds
... ...
500 500 milliseconds *
... ...
60000 60000 milliseconds
250 250 milliseconds *
... ...
10000 10000 milliseconds
Possible values
FALSE SAFE OFF
TRUE Safe ON
43048
43129
253