IFM Electronic AC402S Programming Manual page 145

SmartPLC SafeLine AC4S with fieldbus interfaces
>
Set_AddressMode
Function block type: Function block (FB)
Library:
ACnnnn_Utils.library
Symbol in CODESYS:
>
Description
The FB activates/deactivates the parameter "Automatic addressing" for the selected AS-i master.
>
Input parameters
Parameter Data type
xExecute BOOL
enASi_Master ASI_MASTER
enAuto_Address_Mode ASI_ADDRESS_MODE Parameter
>
Output parameters
Parameter Data type
xReady BOOL
xBusy BOOL
xError BOOL
wDiagnostic WORD
Diagnostic codes:

0x0000 No specific error is set
>
Description
Control execution of the FB
Select AS-i master
activates/deactivates the
automatic addressing mode.
Description
Signal indicates whether the execution
of the FB is completed.
Signal indicates whether the FB is
being executed.
Signal indicates whether errors
occurred while the FB was executed.
Diagnostic information
Possible values
FALSE Don't execute FB
TRUE Start one-time FB
execution
Master_1 AS-i master 1
Master_2 AS-i master 2
Auto_address_disable Automatic
addressing inactive
Auto_address_enable Automatic
addressing active
Possible values
FALSE FB is inactive or being
executed.
TRUE FB execution is completed.
FALSE FB is deactivated or FB
execution is completed.
TRUE FB execution has started but is
not yet completed.
FALSE FB is disabled or is being
executed or FB was executed
without error.
TRUE An error occurred while the FB
was executed.
→ List below (Diagnostic codes)
42565
42425
42587
42530
145