IFM Electronic AC402S Programming Manual page 182

SmartPLC SafeLine AC4S with fieldbus interfaces
uCommandID Description / corresponding command
Command 0x0044 – CTT2 vendor specific selective read
0x1044
Command 0x0045 – CTT2 vendor specific selective write
0x1045
Command 0x0046 – CTT2 device group selective read
0x1046
Command 0x0047 – CTT2 device group selective write
0x1047
Command 0x0049 – CTT2 vendor specific exchange
0x1049
Command 0x004A – CTT2 device group exchange
0x104A
Command 0x004B – CTT2 device group selective read from buffer
0x104B
Command 0x004C – CTT2 device group selective write from buffer
0x104C
Command 0x0050 – Set AS-i master settings
0x1050
Command 0x0051 – Reset error counter
0x1051
Only execute AS-i master commands with input parameter uTarget = 1 or 2!
Detailed information about the acyclic data sets and the command interface is given in the
supplement to the device manual of the SmartSPS SafeLine AC4S (→
documentation for AC4S
182
(→ S. 7)).
Overview: User