IFM Electronic AC402S Programming Manual page 219

SmartPLC SafeLine AC4S with fieldbus interfaces
>
Parameter data
Parameter Data type
ASi_SlaveAdr INT
ASi_Master INT
DisableLogging BOOL
EnableStartupTest BOOL
SynchTime WORD
* ... Default value
>
Process data
Parameter Data type
S_IN_dependent SAFEBOOL
Description
Address of the AS-i slave
AS-i master to which the AS-i
slave is connected
Transmission of the event
messages to OSC of the device
Control execution of the start-up
test
Synchronisation time
Description
Safe process signal
Possible values
1 Slave address 1
... ...
31 slave address 31
1 AS-i Master 1
2 AS-i Master 2
FALSE Following states of the state diagram
are transmitted to the OSC: *

S_ON

S_OFF

S_Test

S_Error

S_Init (HW-Error)
TRUE Following states of the state diagram
are transmitted to the OSC:

S_Test

S_Error

S_Init (HW-Error)
FALSE No start-up test *
TRUE Start-up test is executed; slave waiting
for start-up sequence OFF  ON
0 Infinite
250 250 milliseconds
... ...
500 500 milliseconds *
... ...
60000 60000 milliseconds
Possible values
FALSE Safe OFF
TRUE Safe ON
43068
43123
219