IFM Electronic AC402S Programming Manual page 183

SmartPLC SafeLine AC4S with fieldbus interfaces
>
Output parameters
Parameter Data type
uCount WORD
xReady BOOL
xError BOOL
uErrorCode WORD
Diagnostic codes:

0xnF01 Unknown error

0x0F02 Unknown/invalid target

0x0F03 Unknown command ID

0x0F04 Invalid parameters

0x0F05 Timeout during processing
Description
Number of valid bytes in pDataOut
(uCount <= uSizeOut)
Signal indicates whether the execution
of the FB is completed.
Signal indicates whether errors
occurred while the FB was executed.
Error code of the executed command
1
Possible values
integer value in hexadecimal
representation
FALSE FB is inactive or being
executed.
TRUE FB execution is completed.
FALSE FB is disabled or is being
executed or FB was executed
without error.
TRUE An error occurred while the FB
was executed.
Command error code of the corresponding
command channel
OR: → List below (Diagnostic codes)
42614
183