IFM Electronic AC402S Programming Manual page 180

SmartPLC SafeLine AC4S with fieldbus interfaces
>
Input parameters
Parameter Data type
xExecute BOOL
uCommandID WORD
uTarget INT
pDataIn POINTER TO
WORD
uSizeIn WORD
pDataOut POINTER TO
WORD
uSizeOut WORD
>
Table: System commands
uCommandID Description
DS1 – System information
0x0001
Command 0x0101 – Quick set-up AS-i masters 1 + 2
0x1101
Command 0x0103 – Select user language
0x1103
Command 0x0104 – Change display settings
0x1104
Command 0x0105 – Set output control
0x1105
Command 0x0109 – Set date / time
0x1109
Command 0x010A – Configure the NTP server settings
0x110A
Command 0x010B – Read date / time / NTP settings
0x110B
Command 0x010C – Reboot system
0x110C
Command 0x010D – Read fieldbus info
0x110D
0x1110 Command 0x0110 - Display target visualisation
Only execute system commands with the input parameter uTarget = 0!
Detailed information about the acyclic data sets and the command interface is given in the
supplement to the device manual of the SmartSPS SafeLine AC4S (→
documentation for AC4S
>
180
Description
Control execution of the FB
ID of the command to be executed
Device component to which the
command is to be sent
Buffer for data that is assigned to the
command as input parameters.
Size of the buffer for the input
parameters (number of bytes)
Buffer for data that is returned as
output parameters (results)
Size of the buffer for the output
parameters (number of bytes)
(→ S. 7)).
Possible values
FALSE Don't execute FB
TRUE Start one-time FB execution
→
Table: System commands
→
Table: AS-i master commands
(→ S. 181)
0 system
1 AS-i master 1
2 AS-i master 2
Commando parameter described in the
command request channel (word 3 to 120)
Return values described in the command
reply channel (data as of word 5)
Overview: User
42602
(→ S. 180)
42548