SmartPLC SafeLine AC4S with fieldbus interfaces
>
Reset the standard application (warm)
To reset the standard application on the Standard PLC, choose one of the following options:
CODESYS: command [Reset (warm)]
► In the standard area of device tree:
Highlight the required standard application as active application.
► Select [Online] > [Login] to establish a connection to the CODESYS Standard PLC.
>
CODESYS switches to online mode.
► Select [Online] > [Reset warm] to reset the standard application.
GUI: command [Reset]
►
>
► Select [All Applications] tab.
► Use [Reset] to reset all standard applications.
>
Reset the Standard application (cold)
To reset the standard application on the Standard PLC, choose one of the following options:
Download the standard application to the device
→Download standard applciation to AC4S
►
CODESYS: command "Reset (cold)"
► In the standard area of device tree:
Highlight the required standard application as active application.
► Select [Online] > [Login] to establish a connection to the CODESYS Standard PLC.
>
CODESYS switches to online mode.
► Select [Online] > [Reset cold] to reset the standard application.
>
Reset the Standard application (origin)
To reset the standard application on the Standard PLC:
CODESYS: command "Reset (origin)"
► In the standard area of device tree:
Highlight the required standard application as active application.
► Select [Online] > [Login] to establish a connection to the CODESYS-Standard PLC.
>
CODESYS switches to online mode.
► Select [Online] > [Reset origin] to reset the standard application.
(→ S. 102)
42524
42526
42527
113