IFM Electronic AC402S Programming Manual page 204

SmartPLC SafeLine AC4S with fieldbus interfaces
>
Diagnostic messages
By means of the parameter "DisableLogging" the programmer can control the routing of state
messages of the logical devices to the online support centre (OSC). If the parameter is deactivated, all
state changes and error events are transmitted to the OSC. If the parameter is activated, only error
events are transmitted to the OSC.
Message type States
Error message S_Test_e
S_Error_e
S_Init_e
Status message S_OFF_e
S_ON_e
204
Description
State for going through the start-up test
Locked error state
Initialisation state
Safe OFF
Safe OFF
43295