IFM Electronic AC402S Programming Manual page 184

SmartPLC SafeLine AC4S with fieldbus interfaces
>
Example: Change language setting of the device
Task: Set the language of the graphic user surface of the device to "Spanish" with the FB
ACnnnn_SysCmd.
Command type: Command request channel
Input parameters of the FB:
Parameter Value
uCommandID 0x1103
uTarget 0
pDataIn arDataIn
uSizeIn 0x0001
pDataOut --
uSizeOut --
Content of arDataIn:
Word no. Contents
1 0x4553
184
Explanation
Corresponding commando channel:
→ Kommando 0x0103 – Bediensprache umschalten
System command

Variable of the data type Array of Words

arDataIn contains the command parameters
arDataIn only consists of 1 line since word 1 and 2 as well as 4 to 120 of the command
request channel are not considered.
irrelevant since command request channel
irrelevant since command request channel
Explanation
Spanish
(→ device manual supplement)
42398