Replacing The Fusing Unit - Konica Minolta magicolor 7450 Service Manual

3. Periodical check
3.5.5

Replacing the Fusing Unit

CAUTION
• Before replacing the Fusing Unit, ensure that it has had time to cool down.
[2]
26
[9]
4039F2C507DB
[1]
4039F2C010DA
[3]
4039F2C011DA
Field Service Ver. 1.0 May 2006
NOTE
• When removing / installing the
Imaging Unit, use care not to touch
the surface of the PC Drum [9].
1. Turn OFF the Main Power Switch
and unplug the power cord from the
power outlet, then wait for about 20
minutes.
2. Open the Front Door.
3. Remove two Claws [1], and remove
the Exit Tray Connector protective
cover [2].
4. Disconnect the Connector [3].