POSITIONING THE APPLIANCE
For a safe and quiet operation, the furnace must be levelled in both directions. Give each "U"
shape track, an equal support so that the weight is evenly distributed.
PIPE CONNECTOR AND DAMPER
The pipe connecting the furnace to the chimney must be as short as possible. The use of 45
recommended for a better evacuation of the smoke in the wood burning furnace. The barometric damper provided with
the appliance must be installed in the oil unit evacuation pipe, approximately 24
TYPE OF FURNACE
PSG/ UH-CADDY
FOR PSG/ UH-CADDY
WALL
ELBOW 45°
Ø7"
T CONNECTOR
VERIFICATION HOLE
FOR OIL COMBUSTION
CEILING
MINIMUM DRAFT IN
WOOD FLUE PIPE
Ø7"
FIGURE #1
MINIMUM DRAUGHT IN
WOOD FLUE PIPE
0.04" W.C.
REDUCER 7" TO 6"
BAROMETRIC DAMPER 5"
DRAFT 0.02" W.C. TO 0.04" W.C.
FURNACE TYPE
CADDY
FIGURE #2
*REQUIRE A FLUE PIPE REDUCER
0.04" W.C.
REDUCER 7" TO 6"
BAROMETRIC DAMPER 5"
DRAFT 0.02" W.C. TO 0.04" W.C.
VERIFICATION HOLE
FOR OIL COMBUSTION
18"
26
"
from the unit flue outlet of the unit.
(UH) OIL BURNING
UNIT FLUE
PIPE DIAMETER
5"
CHIMNEY PIPE
DIAMETER
*7"
o
elbows is highly