Rear Panel Leds - HPE ProLiant MicroServer Gen10 Plus User Manual

Item Component
5 System QR code label
6 DisplayPort 1.0
7 VGA port
8 1 Gb RJ-45 port 4
9 1 Gb RJ-45 port 3
10 1 Gb RJ-45 port 2
11 1 Gb RJ-45 port 1/iLO shared
network port
12 Power jack
13 PCIe3 ×16 expansion slot
1
These ports are also known as SuperSpeed USB 5 Gb/s ports. The appropriate cable and compatible hardware are required to take
advantage of the 5 Gb/s data transfer speed.

Rear panel LEDs

Item LED
1 NIC link
Description
To access the server mobile product page (https://www.hpe.com/
qref/microservergen10plus), use a QR code scanner app in your
smartphone to scan this label. This mobile page contains links to server
setup information, spare part numbers, QuickSpecs, troubleshooting
resources, and other useful product links.
Connects to a high-resolution digital display device.
Connects to an analog display device.
To connect the server to a wired network, connect a standard Ethernet
cable here.
To connect the server to a wired network, connect a standard Ethernet
cable here.
When the iLO enablement option is installed, this port can be
configured to handle both server network and iLO network traffic.
Connects the power cord.
Connects a half-height, half-length (low-profile) PCIe3 expansion board
option.
Status
Solid green
Off
Definition
Network link
No network link
Component identification
Table Continued
9